PLANET MAP-3020 - Manual (Page 118)

PLANET Mesh Network Manager Guide
PLANET Mesh Network Manager Guide Page 118 of 126
• Data type: Display String, default value is “public”
• Data length: 4 ~ 32
• MUST reenter the same community at the correspond Confirm field to edit
• Please retain this parameters as it is used to plot the topology map
5) Read-Write Community
• The community keyword used for SNMP version 1 or 2c, which allow both the
read and write accessing
• Data type: Display String, default value is “private”
• Data length: 4 ~ 32
• MUST reenter the same community at the correspond Confirm field to edit
6) Read-Only Username
• The principal name of the SNMP version 3 daemon, which allow the read
accessing only
• Data type: Display String, default value is “snmpv3rouser”
• Data length: 8 ~ 50
7) Read-Write Username
• The principal name of the SNMP version 3 daemon, which allow both the
read and write accessing
• Data type: Display String, default value is “snmpv3rwuser”
• Data length: 8 ~ 50
8) Auth Password
• The password used user authentication (SNMP version 3 only)
• Data type: Display String, default value is “snmpv3password”
• Data length: 8 ~ 50
• MUST reenter the same password at the correspond Confirm field
9) Privacy Password
• The privacy protocol pass phrase used for SNMP version 3 only
• Data type: Display String, default value is “snmpv3passphrase”
• Data length: 8 ~ 50
• MUST reenter the same password at the correspond Confirm field