Security switch snmp user add – PLANET MGSW-28240F User Manual
Page 449
User’s Manual of MGSW-28240F
Parameters:
: entry index (1-64)
Example:
Lookup SNMPv3 community entry
MGSW-28240F:/>security switch snmp community lookup
Idx Community Source IP Source Mask
--- -------------------------------- --------------- ---------------
1 public 192.168.0.20 255.255.255.0
2 private 0.0.0.0 0.0.0.0
Number of entries: 2
Security Switch SNMP User Add
Description:
Add SNMPv3 user entry.
The entry index key are
Syntax:
Security Switch SNMP User Add
Parameters:
: Engine ID, the format may not be all zeros or all 'ff'H and is restricted to 5 - 32 octet string
: A string identifying the user name that this entry should belong to. The name of "None" is reserved.
The allowed string length is (1-32), and the allowed content is ASCII characters from 33 to 126
md5
: An optional flag to indicate that this user using MD5 authentication protocol. The allowed length is
(8-32), and the allowed content is ASCII characters from 33 to 126
sha
: An optional flag to indicate that this user using SHA authentication protocol. The allowed length is
(8-40), and the allowed content is ASCII characters from 33 to 126
: A string identifying the authentication pass phrase
des
: An optional flag to indicate that this user using DES privacy protocol privacy protocol should belong to.
The allowed string length is (8-32), and the allowed content is ASCII characters from 33 to 126
: A string identifying the privacy pass phrase.
The allowed string length is (8-40), and the allowed content is ASCII characters from 33 to 126
Example:
Add SNMPv3 user entry
449