PLANET MGSW-28240F User Manual
Page 237

User’s Manual of MGSW-28240F
The page includes the following fields:
Object
Description
Indicates the ACL user.
User
Ingress Port
Indicates the ingress port of the ACE. Possible values are:
All
: The ACE will match all ingress port.
Port
: The ACE will match a specific ingress port.
Frame Type
Indicates the frame type of the ACE. Possible values are:
Any
: The ACE will match any frame type.
EType
: The ACE will
Ethernet Type based ACE will not get matched by
ARP
: The ACE will match ARP/
IPv4
: The ACE will match all IPv4 frames.
IPv4/
IPv4/
: The ACE will match IPv4 frames with UDP protocol.
IPv4/
IPv4/Other
: The ACE will match IPv4 frames, which are not
ICMP/UDP/TCP.
IPv6
: The ACE will match all IPv6 standard frames.
Action
Indicates the forwarding action of the ACE.
Permit
: Frames matching the ACE may be forwarded and learned.
Deny
: Frames matching the ACE are dropped.
Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When
Disabled is displayed, the rate limiter operation is disabled.
Rate Limiter
Port Redirect
Indicates the port redirect operation of the ACE. Frames matching the ACE are
redirected to the port number.
The allowed values are Disabled or a specific port number. When Disabled is
displayed, the port redirect operation is disabled.
Mirror
Specify the mirror operation of this port. The allowed values are:
Enabled
: Frames received on the port are mirrored.
Disabled
: Frames received on the port are not mirrored.
The default value is "Disabled".
Forward packet that matched the specific ACE to CPU.
CPU
Forward first packet that matched the specific ACE to CPU.
CPU Once
The counter indicates the number of times the ACE was hit by a frame.
Counter
Indicates the hardware status of the specific ACE. The specific ACE is not
applied to the hardware due to hardware limitations.
Conflict
237