2 detailed mep configuration – PLANET MGSW-28240F User Manual
Page 369

User’s Manual of MGSW-28240F
Port
: This is an MEP in the Port Domain. 'Flow Instance' is a Port.
Esp
: Future use
Evc
: This is an MEP in the EVC Domain. 'Flow Instance' is an EVC
Domain
Mpls
: Future use
Mode
MEP
: This is a Maintenance Entity End Point.
MIP
: This is a Maintenance Entity Intermediate Point.
Ingress
: This is an Ingress (down) MEP - monitoring ingress traffic on
'Residence Port'.
Direction
Egress
: This is an Egress (up) MEP - monitoring egress traffic on 'Residence
Port'.
The port where MEP is monitoring - see 'Direction'.
Residence Port
Level
The MEG level of this MEP.
Flow Instance
The MEP is related to this flow - See 'Domain'.
Port MEP
: An outer C/S-tag (depending on VLAN Port Type) is added with this
VID.
Tagged VID
Entering '0' means no TAG added.
The MAC of this MEP can be used by other MEPs when unicast is selected (Info
only).
This MAC
There is an active alarm on the MEP.
Alarm
Buttons
: Click to add a new MEP entry
: Click to refresh the page immediately.
: Click to save changes.
:
Click to undo any changes made locally and revert to previously saved values.
4.19.2 Detailed MEP Configuration
This page allows the user to inspect and configure the current MEP Instance.; screen in
Figure 4-19-2
appears.
369