1 qos ingress port tag classification – PLANET MGSW-28240F User Manual
Page 210

User’s Manual of MGSW-28240F
Controls the default QoS class, i.e., the QoS class for frames not classified in any
other way. There is a one to one mapping between QoS class, queue and priority.
A QoS class of 0 (zero) has the lowest priority.
All
means all ports will have one specific setting.
DP Level
The Configuration All with available values will assign to whole ports.
Controls the default DP level, i.e., the DP level for frames not classified in any
other way.
All
means all ports will have one specific setting.
PCP
The Configuration All with available values will assign to whole ports.
Controls the default
All
means all ports will have one specific setting.
DEI
The Configuration All with available values will assign to whole ports.
Controls the default
All
means all ports will have one specific setting.
Tag Class
Shows the classification mode for tagged frames on this port.
Disabled
: Use default QoS class and DP level for tagged frames.
Enabled
: Use mapped versions of
Click on the mode in order to configure the mode and/or mapping.
For more detail information, please refer to chapter 4.9.3.1.
Click to Enable DSCP Based QoS Ingress Port Classification.
DSCP Based
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.9.4.1 QoS Ingress Port Tag Classification
The clasification modes for tagged frames are configured on this page. The QoS Ingress Port Tag Classification screen in
Figure
4-9-5
appears.
210