PLANET MGSW-28240F - Manual (Page 205)

User’s Manual of MGSW-28240F
The page includes the following fields:
Object Description
The port number for which the configuration below applies. 
Port
Controls whether the policer is enabled on this switch port, * means selection all
ports of Managed Switch.

Enabled
Controls the rate for the policer. The default value is 500. This value is restricted
to 100-1000000 when the "Unit" is "kbps" or "fps", and it is restricted to 1-3300
when the "Unit" is "Mbps" or "kfps".

Rate

Unit The Configuration All with available options will assign to whole ports.
Controls the unit of measure for the policer rate as kbps, Mbps, fps or kfps. The
default value is "kbps". All means all ports will have one specific setting.
If flow control is enabled and the port is in flow control mode, then pause frames
are sent instead of discarding frames.
 Flow Control
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.9.3 Port Shaping
This page provides an overview of QoS Egress Port Shapers for all switch ports. The Port Shapping screen in Figure 4-9-2
appears.
205