PLANET MGSW-28240F - Manual (Page 133)

User’s Manual of MGSW-28240F
The page includes the following fields:
Object Description
This is the logical port number for this row. 
Port
 PVID Allow assign PVID for selected port. The range for the PVID is 1-4094.
The PVID will be inserted into all untagged frames entering the ingress port. The
PVID must as same as the VLAN ID that the port belong to VLAN group, or the
untagged traffic will be dropped.
Allows user to set the port to remove default VID. This option could be edited
when Link Type selected to Tagged.
Untag VID
Enable ingress filtering for a port by checking the box. This parameter affects
VLAN ingress processing. If ingress filtering is enabled and the ingress port is not
a member of the classified VLAN of the frame, the frame is discarded. By default,
ingress filtering is disabled (no checkmark).
Ingress Filtering
Determines whether the port accepts all frames or only tagged frames. This
parameter affects VLAN ingress processing. If the port only accepts tagged
frames, untagged frames received on the port are discarded. By default, the field
is set to All.

Accept Frame Type

Link Type Allow 802.1Q Untagged or Tagged VLAN for selected port.
When adding a VLAN to selected port, it tells the switch whether to keep or
remove the tag from a frame on egress.

Untag : outgoing frames without VLAN-Tagged.

Tagged : outgoing frames with VLAN-Tagged.
 Q-in-Q Mode Sets the Managed Switch to QinQ mode, and allows the QinQ tunnel port to be
configured. The default is for the Managed Switch to function in Disable mode.

Disable : The port operates in its normal VLAN mode. (This is the
default.)

MAN Port : Configures IEEE 802.1Q tunneling (QinQ) for an uplink
port to another device within the service provider network.

Customer Port : Configures IEEE 802.1Q tunneling (QinQ) for a client
access port to segregate and preserve customer VLAN IDs for traffic
crossing the service provider network.
Set Out layer VLAN tag
ether type
The Tag Protocol Identifier (TPID) specifies the ethertype of incoming packets on
a tunnel access port.

802.1Q Tag : 8100

vMAN Tag : 88A8
Default : 802.1Q Tag
133