PLANET MGSW-28240F - Manual (Page 371)

User’s Manual of MGSW-28240F
 Format This is the configuration of the two possible Maintenance Association Identifier
formats.
ITU ICC : This is defined by ITU. 'ICC' can be max. 6 char. 'MEG id' can be max. 7
char.
IEEE String : This is defined by IEEE. 'Domain Name' can be max. 8 char. 'MEG
id' can be max. 8 char.
This is either ITU ICC (MEG ID value[1-6]) or IEEE Maintenance Domain Name -
depending on 'Format'. See 'Format'.
 ICC/Domain Name
This is either ITU UMC (MEG ID value[7-13]) or IEEE Short MA Name -
depending on 'Format'. See 'Format'. In case of ITU ICC format this can be max.
7 char. If only 6 char. is entered the MEG ID value[13] will become NULL.
 MEG Id
This value will become the transmitted two byte CCM MEP ID.  MEP Id
Fault Cause indicating that a CCM is received with a lower level than the
configured for this MEP.
 cLevel
Fault Cause indicating that a CCM is received with an MEG ID different from
configured for this MEP.
 cMEG
Fault Cause indicating that a CCM is received with an MEP ID different from all
'Peer MEP ID' configured for this MEP.
 cMEP
Fault Cause indicating that AIS PDU is received.  cAIS
Fault Cause indicating that LCK PDU is received.  cLCK
Fault Cause indicating that server layer is indicating Signal Fail.  cSSF
The consequent action of blocking service frames in this flow is active.  aBLK
The consequent action of indicating Trail Signal Fail to-wards protection is active.  aTSF
This box is used to mark a Peer MEP for deletion in next Save operation.  Delete
This value will become an expected MEP ID in a received CCM - see 'cMEP'.  Peer MEP ID
This MAC will be used when unicast is selected with this peer MEP. Also this
MAC is used to create HW checking of receiving CCM PDU (LOC detection) from
this MEP.
 Unicast Peer MAC
Fault Cause indicating that no CCM has been received (in 3,5 periods) - from this
peer MEP.
 cLOC
Fault Cause indicating that a CCM is received with Remote Defect Indication -
from this peer MEP.
 cRDI
Fault Cause indicating that a CCM is received with a period different from what is
configured for this MEP - from this peer MEP.
 cPeriod
Fault Cause indicating that a CCM is received with a priority different from what is
configured for this MEP - from this peer MEP.
 cPriority
371