PLANET MGSW-28240F - Manual (Page 316)

User’s Manual of MGSW-28240F
The page includes the following fields:
Object Description
 Mode of IP Source
Guard Configuration
Enable the Global IP Source Guard or disable the Global IP Source Guard. All
configured ACEs will be lost when the mode is enabled.
 Port Mode
Configuration
Specify IP Source Guard is enabled on which ports. Only when both Global Mode
and Port Mode on a given port are enabled, IP Source Guard is enabled on this
given port. All means all ports will have one specific setting.
Specify the maximum number of dynamic clients can be learned on given
ports. This value can be 0, 1, 2 and unlimited. If the port mode is enabled
and the value of max dynamic client is equal 0, it means only allow the IP
packets forwarding that are matched in static entries on the specific port.
 Max Dynamic Clients
All means all ports will have one specific setting.
Buttons
: Click to translate all dynamic entries to static entries.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.12.11 IP Source Guard Static Table
This page provides Static IP Source Guard Table. The Static IP Source Guard Table screen in Figure 4-12-11 appears.
Figure 4-12-11: Static IP Source Guard Table Screen Page Screenshot
316