PLANET MGSW-28240F - Manual (Page 244)

User’s Manual of MGSW-28240F
 ARP SMAC Match Specify whether frames can hit the action according to their sender hardware
address field (SHA) settings.

0 : ARP frames where SHA is not equal to the SMAC address.

1 : ARP frames where SHA is equal to the SMAC address.

Any : Any value is allowed ("don't-care").
 RARP SMAC Match Specify whether frames can hit the action according to their target hardware
address field (THA) settings.

0 : RARP frames where THA is not equal to the SMAC address.

1 : RARP frames where THA is equal to the SMAC address.

Any : Any value is allowed ("don't-care").
 IP/Ethernet Length Specify whether frames can hit the action according to their ARP/RARP
hardware address length (HLN) and protocol address length (PLN) settings.

0 : ARP/RARP frames where the HLN is equal to Ethernet (0x06) and
the (PLN) is equal to IPv4 (0x04).

1 : ARP/RARP frames where the HLN is equal to Ethernet (0x06) and
the (PLN) is equal to IPv4 (0x04).

Any : Any value is allowed ("don't-care").
 IP Specify whether frames can hit the action according to their ARP/RARP
hardware address space (HRD) settings.

0 : ARP/RARP frames where the HLD is equal to Ethernet (1).

1 : ARP/RARP frames where the HLD is equal to Ethernet (1).

Any : Any value is allowed ("don't-care").
 Ethernet Specify whether frames can hit the action according to their ARP/RARP protocol
address space (PRO) settings.

0 : ARP/RARP frames where the PRO is equal to IP (0x800).

1 : ARP/RARP frames where the PRO is equal to IP (0x800).

Any : Any value is allowed ("don't-care").
 IP Parameters
The IP parameters can be configured when Frame Type "IPv4" is selected.
Object Description

IP Protocol Filter Specify the IP protocol filter for this ACE.

Any : No IP protocol filter is specified ("don't-care").

Specific : If you want to filter a specific IP protocol filter with this ACE,
choose this value. A field for entering an IP protocol filter appears.

ICMP : Select ICMP to filter IPv4 ICMP protocol frames. Extra fields for
defining ICMP parameters will appear. These fields are explained later
in this help file.

UDP : Select UDP to filter IPv4 UDP protocol frames. Extra fields for
244