beautypg.com

9 mld snooping vlan configuration – PLANET MGSW-28240F User Manual

Page 190

background image

User’s Manual of MGSW-28240F

Figure 4-8-11:

MLD Snooping Configuration Page Screenshot

The page includes the following fields:

Object

Description

Enable the Global MLD Snooping.

Snooping Enabled

Unregistered IPMCv6

Flooding Enabled

Enable unregistered IPMCv6 traffic flooding. Please note that disabling

unregistered IPMCv6 traffic flooding may lead to failure of Neighbor Discovery.

SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers

run the SSM service model for the groups in the address range.

MLD SSM Range

Enable MLD Leave Proxy. This feature can be used to avoid forwarding

unnecessary leave messages to the router side.

Leave Proxy Enable

Enable MLD Proxy. This feature can be used to avoid forwarding unnecessary

join and leave messages to the router side.

Proxy Enable

Specify which ports act as router ports. A router port is a port on the Ethernet

switch that leads towards the Layer 3 multicast device or MLD querier.

If an aggregation member port is selected as a router port, the whole aggregation

will act as a router port. All means all ports will have one specific setting.

Router Port

Enable the fast leave on the port.

Fast Leave

Throtting

The Configuration All with available values will assign to whole items.

Enable to limit the number of multicast groups to which a switch port can belong.

All

means all ports will have one specific setting.

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

4.8.9 MLD Snooping VLAN Configuration

Each page shows up to 99 entries from the VLAN table, default being 20, selected through the "entries per page" input field.

When first visited, the web page will show the first 20 entries from the beginning of the VLAN Table. The first displayed will be

the one with the lowest VLAN ID found in the VLAN Table.

The "VLAN" input fields allow the user to select the starting point in the VLAN Table. The MLD Snooping VLAN Configuration

screen in

Figure 4-8-12

appears.

190