Maintenance and error messages, Maintenance and error messages -3, For further – TA Triumph-Adler DC 2316 User Manual
Page 77
Troubleshooting
OPERATION GUIDE
10-3
Maintenance and Error Messages
When any of the following messages appears on the message display, perform the
procedure provided below.
Message
Procedure
Reference
Close Scan Unit
The scan unit is open. Close the scan unit.
—
Front Cover Open
Close cover
The front cover is open. Close the covers securely.
—
Memory Low
Only 1 Copy Made
The machine’s memory is full. Insert fewer originals and
try to copy again.
—
Open ADF cover
Remove the paper
This appears when the paper has jammed while being
fed from the document processor because of the way it
was placed.
Remove all the document pages inside the document
processor, and set them again correctly.
Open front cover
Remove the paper
A paper jam has occurred. Remove the jammed paper.
Paper Empty
Add paper
The paper has run out. Add paper to the paper source.
The cassette is not properly closed. Be sure the cassette
is closed securely.
Paper Mismatch
There is no paper. Load the correct size paper.
Please Replace
Toner
Toner has run out so further copying or printing is
impossible.
Replace the toner container using a new toner kit.
[PRINTER ERROR]
Out of Memory
The data transferred to the machine was too complex to
print on a page.
—
[PRINTER ERROR]
Engine Panic
Turn the power switch off and then back on again. If this
message still remains, turn the power switch off, and
contact your service representative or authorized service
center.
—
[PRINTER ERROR]
Service Call
[SCANNER ERROR]
Lamp Error
Turn the power switch off and then back on again. If this
message still remains, turn the power switch off, and
contact your service representative or authorized service
center.
—
[SCANNER ERROR]
AFE R/W Error
[SCANNER ERROR]
Home Sensor
[SCANNER ERROR]
NVRAM R/W Fail
Toner Low
Toner is running low. Replace the toner container using a
new toner kit as soon as possible.
Unlock scanner
Power Off and On
Turn the power switch off and slide shipping lock to
unlock position.