TA Triumph-Adler DC 2316 - Manual (Page 112)

Basic Operation
OPERATION GUIDE 3-3
6 Press [Start].
If you want continuous scanning using the
platen, change the first original document
when scanning is completed, and then
change document and press [Start] again.
Scanning of the next original starts. When
all originals are scanned, press [
] on the
numeric keys to start FAX.
NOTE: If 30 seconds pass without operation after a confirmation screen prompting
you to continue scanning or not is displayed, transmission will automatically start.
Stopping Transmission
Press [Stop/Clear] to stop transmission of
the job displayed on the message display.
Transmission can be stopped during:
• Scanning
• Dialing
• Transmission
NOTE: To cancel the timer-based transmission or waiting job (waiting for Auto
Redialing, etc.), refer to Managing Jobs in Memory on page 4-11.