TA Triumph-Adler DC 2316 - Manual (Page 61)

OPERATION GUIDE 8-1
8 System Settings
This chapter explains the procedures to make the various settings that are required
in relation to the overall operation of this machine.
Message Language
You can select the language of the message display from English, Français,
Deutsch, Italiano, Nederlands, Español, Dansk, Svenska, Norsk, Polski,
Čeština, Magyar, Suomi, РУССКИЙ, Lithuanian, Ελληνικά, İngilizce,
, Português, Português(SA).
1
Access 11. Language.
If you are unsure how to use this route map refer to Accessing Menu Items on
page xx.
2
Press W or X to select the language to be used in the display and press [OK].
The display changes to the selected language and returns to the ready screen.
Sleep Mode
The machine has an Auto Sleep Timer that is used to conserve power when it is not
operating. You can adjust this time to between 5 minutes and 2 hours before the
machine enters sleep mode. The factory default time is 15 minutes.
When you change this time, the transition time of Low Power Mode changes.
[Menu]
W or X
1. Common Setup
[OK]
W or X
11. Language
[OK]
Sleep Mode Transition Time Low Power Mode Transition Time
Off Off
5 min 2.5 min
15 min 7.5 min
30 min 15 min
1 hr 0.5 hr
2 hr 1 hr