Eicon Networks DIVA T/A ISDN - Manual (Page 115)

DIVA T/A ISDN Modem User’s Guide
◆ Page 115
Analog Device Support
Malicious Caller Identification
Malicious Caller Identification allows you to register a calling number with your ISDN Service
Provider. To invoke this feature while you are on a call, press R, wait for the dial-tone, then
press *39#. The held call is then automatically reconnected.
This feature is supported in Sweden and may be supported in other regions (but is not
supported in Australia). Check with your ISDN service provider.
This feature requires that Call Hold be supported by your ISDN line.
Using Malicious Caller Identification
To invoke Malicious Caller Identification:
1 While you are on a call, press R, then wait for a dial-tone.
2 Press *39#.
3 The held call is then automatically reconnected.
You can also invoke this feature up to 30 seconds after the caller hangs up.