Eicon Networks DIVA T/A ISDN - Manual (Page 106)

DIVA T/A ISDN Modem User’s Guide
◆ Page 106
Analog Device Support
Call Hold
Call Hold lets you suspend a voice conversation with a person (place them on hold), and
make a call to a second number. You can then toggle back and forth between the first and
second caller. When you are finished talking to the second person, you can hang up that call,
and continue the call with the first person.
Using Call Hold
To place a call on hold:
1 With a voice call active, press R.
2 The person you are speaking with is placed on hold, and you hear a dial tone.
3 Dial the number of the second party.
To switch between held calls
1 Press R, then wait for a dial tone.
2 Press 2.
To disconnect the current cal land continue the other:
1 Press R, then wait for a dial-tone.
2 Press 1.
Note: If you hang up while a call is on hold, the connection remains active and full
communication charges may apply. To indicate that a call is still on hold, the phone will ring
for 30 seconds (90 seconds in Denmark and Sweden).