beautypg.com

Maintenance and cleaning, Check every 2/3 days, Cleaning the glass – MCZ Athos HYDRO 14 kW User Manual

Page 55

background image

PELLET STOVES

Chapter 5

INSTALLATION AND USE MANUAL

page

55

Maintenance and cleaning

Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited

5. MAINTENANCE AND CLEANING

ATTENTION!
All cleaning of all parts must be carried out with the

stove completely cold and unplugged.
The stove does not need much maintenance if used

with certified quality pellets. The necessity for

maintenance increases with use and depending on

the performance requested of it.

5.1. CLEANING TO BE PERFORMED BY THE USER

5.1.1. Cleaning prior to each lighting

Clean the grate with a steel brush, removing any incrustation which could

obstruct the passage of air.

Fig. 1-2

Remember that only a clean, neat grate can ensure

proper operation of your pellet stove.
A simple visual check, carried out daily, will reveal

whether the grate is in good working order.


For good cleaning of the grate, pull it completely out of its housing and

thoroughly clean the grate and holes on the bottom. If you use good-

quality pellets, you will normally only need to use a paintbrush to

restore the perfect condition of the component. For tough incrustations,

use the steel tool provided with the stove and a steel brush.

5.1.2. Check every 2/3 days

Clean and empty the ash drawers, watching out for hot ash.

Figure 2

Only if the ash is completely cold, it is possible to use a vacuum

cleaner to remove it. Use a drum-type vacuum cleaner that is suitable

for picking up particles of a certain size.
Experience, and the quality of the pellets used, will determine the

frequency of cleaning.
It is however advisable not to let it exceed 2 or 3 days.
When the job is completed, re-close the ash drawers, making sure that

they are properly shut.

5.1.3. Cleaning the glass

For cleaning the ceramic glass, the use of a dry brush is recommended,

or if it is very dirty, the special spray detergent, applying a small

quantity then cleaning with a cloth.

Figure 4

ATTENTION!
Do not spray the product on the painted parts or on

the gaskets of the door (ceramic fibre cord)

Figure 1 – Example of dirty grate

Figure 2 – Example of clean grate

Figure 3 - Cleaning of ash collection compartment

Figure 4 - Glass cleaning

This manual is related to the following products: