MCZ Athos HYDRO 14 kW User Manual
Page 46
PELLET STOVES
Chapter 4
INSTALLATION AND USE MANUAL
page
46
Operation
Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
ON 3, OFF 3, ON 4, OFF 4, ON 5, OFF 5, ON 6, OFF 6, ON 7, OFF 7,
where the numerals refer to the days of the week (see table), ON
means "ACTIVE" and OFF means "INACTIVE". In step
UT 07, the key
o
scrolls the number that refers to the days, and the key
n
activates
them or deactivates them. Scroll through the days using the key
o
.
Then use the key
n
to establish which days are to be active or
inactive. After making this setting, memorize it with the key
p
, and
you will automatically go to
UT 08.
1
Corresponds to MONDAY
2
Corresponds to TUESDAY
3
Corresponds to WEDNESDAY
4
Corresponds to THURSDAY
5
Corresponds to FRIDAY
6
Corresponds to SATURDAY
7
Corresponds to SUNDAY
Example Set the times for lighting (7:30) and extinguishing (9:30) for
programme 1. This is step
UT 07. Suppose you want to programme the
stove so that it follows this programme on Monday, Wednesday and
Friday.
• Press the key
o
, until you come to either position ON 1, or OFF 1.
If you see ON 1, do nothing. If you see OFF 1, press the key
n
to
read ON 1 (Monday active).
• Now press once on the key
o
to go to position ON 2, or OFF 2
and again press or not the key
n
to read OFF 2 (Tuesday not
active).
• Press once on the key
o
to go to ON 3, or OFF 3 and then press
or not key
n
to read ON 3 (Wednesday active).
• Press once on the key
o
to go to ON 4, or OFF 4 and then press
or not key
n
to read ON 4 (Thursday inactive).
• Press once on the key
o
to go to ON 5, or OFF 5 and then press
or not key
n
to read ON 5 (Friday active).
• Press once on the key
o
to go to ON 6, or OFF 6 and then press
or not key
n
to read ON 6 (Saturday inactive).
• Press once on the key
o
to go to ON 7, or OFF 7 and then press
or not key
n
to read ON 4 (Sunday inactive).
• Finally, press the key
p
to memorize complete setting of
activations of programme 1, and you will go automatically to step
UT 08, thus entering PROGRAMME 2.
PROGRAMME 2
Symbol on display
(8)
UT 08
UT 09
UT 10
Data to be inserted
Schedule
Lighting the
stove
Schedule
Shutdown
Days activated or
deactivated
On/Off 1,2,3,4,5,6,7