Epson EPL-N7000 - Manual (Page 335)

324 Troubleshooting
Problems printing via the USB interface
Problems printing via the network
The printer does not print normally via the USB interface.
Cause What to do
The Data Format setting in the
printer’s Properties dialog box
is not set to ASCII data. The printer cannot print binary data
when it is connected to the computer via
the USB interface. Make sure that the
Data Format setting, which is accessed
by clicking Advanced on the PostScript
sheet of the printer’s Properties dialog
box, is set to ASCII data.
If your computer is running Windows
XP, click the Device Settings tab in the
printer’s Properties dialog box, then
click the Output Protocol setting and
select ASCII.
The printer does not print normally via the network interface.
Cause What to do
The Data Format setting,
which is accessed by clicking
Advanced on the PostScript
sheet of the printer’s
Properties dialog box, is
different from the data format
setting specified in the
application. If the file is created in an application that
allows you to change the data format or
encoding, such as Photoshop, make sure
that the setting in the application
matches that in the printer driver.