Epson EPL-N7000 - Manual (Page 194)

Using the PostScript Printer Driver (Macintosh) 183
5
5
5
5
5
5
5
5
5
5
5
5
❏ If you are printing on a custom paper size created under the Custom
Page Default setup option page on the Page Setup dialog box, the
paper must be fed from the MP Tray. Only the Auto Select and the
MP Tray options can be selected.
Printer Features
Resolution
Select the resolution that you want to print in. The options are
Fast and Quality. The Quality setting prints at a higher resolution,
but the printing time will be longer.
Density
Sets the print density. The options are Lightest, Light, Medium,
Dark, and Darkest.
RITech
Select this check box to use RITech when printing. RITech
improves the appearance of printed lines, text, and graphics.
Toner Save Mode
Select this check box to use the Toner Save feature when printing.
When the Toner Save feature is turned on, the printer uses about
50% less toner than normal.
Image Protect
Select this check box to give priority to the quality of the printed
image. When this is selected, lossy compression is not used even
when memory runs low during printing. If this check box is left
unselected, lossy compression is used when memory resources
are too low.
Start Page
Select this check box to start printing from the second (back) page,
leaving the first page blank. This setting is enabled only when the
Print on Both Sides check box on the Duplex setup option page is
selected.