Epson EPL-N7000 - Manual (Page 112)

Using the PostScript Printer Driver (Windows) 101
4
4
4
4
4
4
4
4
4
4
4
4
1. Without connecting the printer to your computer, turn on
both the computer and the printer.
2. Once Windows has started, connect your computer to the
printer with a USB cable.
3. The Add New Hardware Wizard will launch automatically.
Click Next to start the installation of the USB printer driver.
4. Select Search for best driver for your device (Recommended),
and then click Next.
5. Insert the printer software CD-ROM into your CD-ROM
drive.
6. Select only the Specify a location check box, and then specify
the following path on the CD-ROM. You can click Browse to
select the path. If your CD-ROM drive is D:, the path will be
D:\ADOBEPS\ENGLISH\WIN9X\PS_SETUP (change the
drive letter as needed for your system).
7. Click Next to continue with the installation.
8. If the USB printer driver file is correctly recognized, the
message “EPSON USB Printer” will appear. Click Next to
continue with the installation.
9. When installation of the USB printer driver is done, click
Finish.
10. After the USB printer driver installation is done, the Add
Printer Wizard will launch automatically. Follow the
on-screen instructions to continue with the installation until
the screen asking you to select the printer model is displayed.
11. Click Have Disk and specify the path to the appropriate INF
file necessary for installation. If your CD-ROM drive is D:, the
path will be D:\ADOBEPS\ENGLISH\WIN9X\PS_SETUP
(change the drive letter as needed for your system).