Epson EPL-N7000 - Manual (Page 333)

322 Troubleshooting
Font and image problems
The font on the printout is different from that on the screen.
Cause What to do
The PostScript screen fonts are
not installed. The PostScript screen fonts must be
installed on the computer that you are
using. Otherwise, the font that you select
is substituted by some other font for
display on the screen.
The Substitute printer fonts for
TrueType fonts when
applicable setting on the Fonts
sheet of the printer’s
Properties dialog box is turned
on, but the TrueType fonts are
not replaced by the printer
fonts. If the Substitute printer fonts for
TrueType fonts when applicable setting
on the Fonts sheet of the printer’s
Properties dialog box is turned on,
TrueType fonts are replaced by the
printer fonts before they are printed.
Specify the appropriate substitution
fonts using the Font Substitution Table.
The printer fonts cannot be installed.
Cause What to do
The Emulation menu in the
printer’s Control Panel is not
set to PS3 for the interface that
you are using. Change the Emulation menu setting to
PS3
for the interface that you are using,
then try reinstalling the printer fonts
again.