Epson EPL-N7000 - Manual (Page 242)

Installing Options 231
7
7
7
7
7
7
7
7
7
7
7
7
5. Fasten the Duplex Unit to the printer securely with the two
screws.
Use the wrench that comes with the unit.
Note:
Keep the wrench in a safe place after use.
6. Reconnect all interface cables and the power cord.
7. Plug the printer’s power cord into an electrical outlet.
8. Turn on the printer.
To confirm that the Duplex Unit is installed correctly, use the
printer’s control panel menus to print a status sheet. See “Printing
a Status Sheet” on page 304 for instructions. If the Duplex Unit is
not listed on the status sheet, try reinstalling it. Make sure that the
connector on the Duplex Unit is securely connected to the socket
on the circuit board.