Epson EPL-N7000 User Manual

Page 174

Using the PostScript Printer Driver (Macintosh)

163

MediaType
Select the desired paper type to print on. The options are Normal,
Thick, Thick N, Rough, and Transparency. Make sure to select the
correct paper type to avoid smearing or wasting ink.

Density
Sets the print density. The options are Lightest, Light, Medium,
Dark, and Darkest.

Output Bin
You can select the output tray for your print job if the optional
4-Bin Mailbox is installed. The options are Face Down, Mailbox
1, Mailbox 2, Mailbox 3, and Mailbox 4.

Collate
Select the On radio button to print multiple copies of the
document in page order. If None is selected, each page is printed
out the specified number of times before the following page is
printed.

Note:
If you enable the Collate option here (On is selected), do not set the
Collate option in the application itself.

Start Page
Select this check box to start printing from the second (back) page,
leaving the first page blank. This setting is enabled only when the
Print on Both Sides check box on the Layout setup option page is
selected.

Image Protect
This setting enables you to specify whether to use lossy
compression when memory runs low during printing. The
options are On and Off. When Image Protect is set to On, lossy
compression is not used. If it is set to Off, lossy compression is
used when memory resources are too low.