Epson EPL-N7000 - Manual (Page 15)

4 Getting to Know Your Printer
a. LCD panel Displays printer status messages and
control panel menu settings.
b.
c.
d.
e. Back button
Up button
Enter button
Down button Use these buttons to access the control
panel menus, where you can make printer
settings and check the status of
consumable products. For instructions on
how to use these buttons, see “Using the
Control Panel Menus” on page 388.
f. Error light On or flashes when an error is detected.
g. Start/Stop button Switches the printer between ready and
offline status while no error has occurred.
When the printer is offline and the data
light is on, press it down for more than two
seconds to print the specified copies of the
first page of the print job that the printer is
currently receiving.
When the error light is flashing, press this
button to clear the error and switch the
printer to ready status.
When the error light is on, perform the
necessary procedures to clear the error,
and then press this button to switch the
printer to ready status.
Note:
When the error light is flashing, the printer may
automatically switch to ready status if you set
Auto Continue to ON with the control panel
menu. See “Setup Menu” on page 404 for more
information.