Epson EPL-N7000 - Manual (Page 133)

122 Using the PostScript Printer Driver (Windows)
Send CTRL-D After Each Job
Specify whether a CTRL+D character should be sent at the end of
every PostScript document. CTRL+D at the end-of-file (EOF) will
reset your printer to its default settings to ensure that the current
print job will not affect future print jobs. However, activating this
setting may cause the print job to fail if it is connected through a
network instead of the parallel or serial interface.
Job Timeout
Specify the maximum number of seconds that can elapse for a
print job to get from the computer to the printer before the printer
stops trying to print the document. If you enter “0” (zero), the
printer will continue trying to print indefinitely.
Wait Timeout
Specify the maximum number of seconds that the printer will wait
to get more PostScript information from the computer before the
print job is automatically canceled. After the specified time
elapses, the printer will stop trying to print the document and
prints an error message instead. If you enter “0” (zero), the printer
will wait indefinitely. You may want to increase this value when
printing complicated documents.
Minimum Font Size to Download as Outline
Specify the minimum font size (in pixels) for which the printer
driver will download TrueType fonts as outline (Type 1) fonts. A
font smaller than the minimum setting will be downloaded as a
bitmap (Type 3/Type 32) font.
Maximum Font Size to Download as Bitmap
Specify the maximum font size (in pixels) for which the printer
driver will download TrueType fonts as bitmap (Type 3/Type 32)
fonts. A font larger than the maximum setting will be
downloaded as an outline (Type 1) font.