Epson EPL-N7000 - Manual (Page 334)

Troubleshooting 323
9
9
9
9
9
9
9
9
9
9
9
9
Problems printing via the parallel interface
The edges of texts and/or images are not smooth.
Cause What to do
The Print Quality is set to Fast. Change the Print Quality setting in the
Graphics sheet to Quality.
The printer does not have
sufficient memory. Increase the printer memory.
The printer does not print normally via the parallel interface.
(Windows 98/95 only)
Cause What to do
The computer is connected to
the printer via the parallel
interface and the parallel port
setting is set to the ECP mode. The printer may not print normally if the
computer is connected to the printer via
the parallel interface and the ECP mode
is set. When this is the case, follow the
steps below to make sure that the mode
setting is correct:
(1) Click Start, select Settings, then click
Printers.
(2) Right-click the icon for the printer,
then click Properties.
(3) Click the Details tab, then click the
Spool Settings button.
(4) Select Disable bi-directional support
for this printer, then click the OK button.