Epson EPL-N7000 - Manual (Page 177)

166 Using the PostScript Printer Driver (Macintosh)
7. When installation is done, click Close.
This completes the installation of the PostScript 3 printer driver.
You now need to select the printer as described in the next section.
Selecting the Printer
The procedure for selecting the printer varies depending on the
protocol or interface used to connect the printer to your computer.
Note:
❏ You cannot use FireWire for printer connection in the PostScript 3
mode. Although EPSON FireWire appears in the interface pop-up
list, it cannot be used with the PostScript 3 printer driver.
❏ You need to make the settings for your installed options manually
when the printer is connected using USB, IP printing, or
Rendezvous. When the printer is connected using AppleTalk, the
printer software automatically makes the settings.
AppleTalk
Follow these steps to select the printer when it is connected using
AppleTalk:
1. Go to the Utilities folder located inside the Applications
folder, and then double-click Print Center.
The Printer List window appears.