Epson EPL-N7000 - Manual (Page 262)

Installing Options 251
7
7
7
7
7
7
7
7
7
7
7
7
13. Close the front cover by pressing it firmly until it clicks into
place.
14. Reconnect all the interface cables and the power cord.
15. Plug the printer’s power cord into an electrical outlet.
16. Turn on the printer.
To confirm that the memory module is installed correctly, print a
status sheet. See “Printing a Status Sheet” on page 304 for
instructions. If the total amount of memory listed does not include
the size of the optional memory module, try reinstalling the
module. Make sure that the module is securely seated into the
memory slot on the circuit board.
Removing a memory module
To remove a memory module, perform the installation procedure
in reverse.