Epson EPL-N7000 - Manual (Page 267)

256 Replacing the Consumable Product
Precautions During Replacement
When replacing a consumable product, please be sure to:
❏ Provide enough space for the replacement procedure. You
will have to open some parts (such as the printer cover) of the
printer when you are replacing consumables.
❏ Do not install a used consumable product into the printer.
w
Warning:
❏ Be careful not to touch the fuser, which is marked CAUTION
Hot Surface Avoid Contact, or the surrounding areas. If
the printer has been in use, the fuser and surrounding areas
may be very hot.
❏ Do not dispose of a used consumable product in fire, as it may
explode and cause injury. Dispose of it according to local
regulations.
Replacement Messages
When you see the following message on the LCD panel or an
EPSON Status Monitor 3 window, prepare a new imaging
cartridge. You can continue to print for a short time after the
message appears, but EPSON recommends early replacement to
maintain print quality and extend the life of your printer.
LCD Panel Message Description
Toner Low The amount of toner remaining in the imaging
cartridge is low.