Emerson Process Management ControlWave EFM 3808 - Manual (Page 201)

CI-ControlWave EFM Appendix F / F- 1
Appendix F
Using ControlWave EFM
WebBSI Web Pages
F.1 GENERAL OVERVIEW
The ControlWave EFM is configured and monitored using WebBSI Web pages developed
specifically for the standard application program. The Web pages are stored and displayed
on a personal computer (PC), and use either OpenBSI Network edition or Local edition to
interface to the ControlWave EFM. Web pages provide:
* Sign-on to the ControlWave EFM (CW EFM)
* Invoke menus to configure the CW EFM for operation
* Read current gas flow and total information
* Set the CW EFM Date and Time
* Change the CW EFM network address
* Collect & Display the Daily, Hourly, Periodic, & Audit Logs
F.1.1 Viewing WebBSI
WebBSI is best viewed under these conditions:
• The Internet Explorer window be maximized or be viewed full-screen.
• The resolution of the monitor be at least 800x600 or above (preferably 1024x768 or above).
• The color depth can be at least 16 bit high color or above (preferably 24 bit true color or
above).
• The text size of Internet Explorer be "Medium" or smaller (preferably "Medium").
• JavaScript and ActiveX Controls be enabled in Internet Explorer.
Pop-up Help windows for WebBSI Web pages can be accessed by clicking the Help button
on the left side of WebBSI Web pages. The help windows must be closed in order to open
another.
On pages that contain tables of controls:
• A white background on a control means that it is read/write.
• A beige background on a control means that it is read only.
NOTE: Web pages may appear slightly different than those displayed herein!
F.2 INSTALLING WebBSI SOFTWARE & ControlWave EFM Web
Pages
The WebBSI software requires a PC (computer) running either OpenBSI Network Edition
or OpenBSI Local Edition, with the WebBSI ActiveX controls installed and registered on
the PC (see appropriate document for details).
ControlWave EFM Web pages will be installed in the following directory as the default:
C:\OpenBSI\CWEFM\ and the default startup page will be CW_MICRO_EFM.htm