Emerson Process Management ControlWave EFM 3808 - Manual (Page 190)

E-8 / Appendix E - Display/5x5Keypad CI-CW MICRO/CW EFM
Figure 8 - Clock Display
E4.1.3.1 Changing the Time
From the display shown in Figure 8, press Time [F2]. Colons (:) will appear on the third
line. Enter the new time there and press [ENTER]. Valid times range from 00:00:00 to
23:59:59. Invalid entries will be ignored. The display will be updated to show the new time.
Figure 9 - Time Set Display
If you make a mistake while entering the new time, use [DEL] to backspace and delete one
character at a time.
E4.1.3.2 Changing the Date
From the clock display (Figure 8, press [F1]. Slash marks (/) will appear on the third line.
Enter the new date there and press [ENTER].
Figure 10 - Date Set Display
If you make a mistake while entering the new date, use [DEL] to back space and delete one
character at a time. Press [F4] to return to the Logged-On Display (Figure 7C).
E4.1.4 Choosing a Variable List from the List Menu
The List Menu is another area where variable information can be seen. As explained earlier
in this section, your first opportunity to read variable information is by choosing the