Emerson Process Management ControlWave EFM 3808 - Manual (Page 188)

E-6 / Appendix E - Display/5x5Keypad CI-CW MICRO/CW EFM
variable name appears on the first line. The variable value appears on the second line and
status information appears on the third line. An example is shown in Figure 6.
When all variables in the list have been displayed, they will be shown again in the same
order. This is called Single Variable Mode.
Pressing Mlti [F2] activates Multiple Variable Mode. Multiple Variable Mode displays up to
three (3) variables and their values on the screen simultaneously. Pressing Sngl [F2]
terminates Multiple Variable Mode and returns you to Single Variable Mode.
Figure 6 - Scrolling
Press HOLD [F1] to halt scrolling. Changing variable values will continue to be displayed.
Press GO [F1] to resume scrolling.
Press EXIT [F4] to return to the Identifier Display (Figure 4).
E4.1.2 Signing-On
To access the List Menu, you must first sign-on with a proper password. From the
Identifier Display (Figure 4), press [F1]. The screen will look like Figure 7A or 7C. If the
display looks like Figure 7C:
Someone else has already signed on. Go to the paragraph below that starts "Once you
have successfully signed on,…".
If the display looks like Figure 7A:
Select the Username (default = system) by using the Up and Down Arrow Keys. If the
Username system is displayed and no other Username is available (i.e., no others have
been assigned), press [ENTER].
Enter a password using the 0 to 9 keys. For security, asterisks will appear as you enter
the digits. If you make a mistake, press [F1] and try again (or use the delete key to
delete the previously pressed key action). The default password is 666666 (used when a
password is not known or no password has been assigned). After typing the password,
press [ENTER].
If your password is not recognized, the asterisks will be erased after you press
[ENTER]. Check your password and try again.