Yaskawa Sigma-5 Large Capacity Users Manual: Design and Maintenance-Command Option Interface - Manual (Page 172)

5.2 Tuning-less Function
5-13
5
Adjustm
e
nts
Load Level
a) Using the utility function
To change the setting, refer to 5.2.2 Tuning-less Levels Setting (Fn200) Procedure.
b) Using the parameter
Digital Operator Display Meaning
Mode 0 Load level : Low
Mode 1 [Factory setting] Load level : Medium
Mode 2 Low level : High
Parameter Meaning When Enabled Classification
Pn170
n.0 Load level : Low (Mode 0)
Immediately Setup
n.1
[Factory setting] Load level : Medium (Mode 1)
n.2
Low level : High (Mode 2)