Yaskawa iQpump Programming Manual - Manual (Page 141)

YASKAWA TM.iQp.02 iQpump Drive Programming Manual 141
■
P2-20 Alternative Sleep Activation Level
Setting Range: 0.0 to 120.0 Hz
Factory Default: 0.0 Hz
The iQpump drive can be configured to activate a “sleep” mode. In addition, the iQpump drive can be configured to activate an
alternative “sleep” mode. When the Sleep Level Type (P2-01) is set for a value of 0 (P2-01 = 0: Output Frequency), the alternative sleep
activation level is set when a value greater than 0 is programmed in the Alternative Sleep Activation Level (P2-20).
Figure 1.106
Figure 111
Figure 1.107
Figure 112
P1-06
SLEEP MODE
SLEEP PERMITTED
P2-02
P2-20
P2-03
P1-06
SLEEP PERMITTED
P2-02
P2-20
P2-03
SLEEP MODE