Yaskawa GPD515/G5 - Manual (Page 45)

10 Appendix 2 Parameter Cross Reference
YASKAWA PL.A1000.01 G5 to A1000 - Product Transition Guide 45
Motor Parameters
Motor Rated Current E2-01 1.90A* E2-01 * * Depends on drive capacity.
Motor Rated Slip E2-02 2.90 Hz* E2-02 * * Depends on drive capacity.
Motor de-coupled load
current
E2-03 1.20A* E2-03 * * Depends on drive capacity.
Number of Motor
Poles
E2-04 4-pole E2-04 4-pole ―
Motor Line-to-Line
Resistance
E2-05 9.842* E2-05 * * Depends on drive capacity.
Motor Leakage
Inductance
E2-06 18.2 E2-06 * * Depends on drive capacity.
Motor iron core
saturation
Co-efficient 1
E2-07 0.50 E2-07 0.50 ─
Motor iron core
saturation
Co-efficient 2
E2-08 0.75 E2-08 0.75 ─
Motor Mechanical
Loss
E2-09 0.0 % E2-09 0.0 % ─
Motor Iron Loss for
Torque Compensation
E2-10 14 W* E2-10 * * Depends on drive capacity.
Motor 2 Control Mode
Motor 2 Control
Method Selection
E3-01 2 E3-01 0
E3-01 E3-01
0: V/f 0: V/f
1: V/f w/PG 1: V/f w/PG
2: Open Loop Vector 2: Open Loop Vector
3: Flux Vector Control 3: Closed Loop Vector
Motor 2 V/f
Characteristics
Motor 2 Max
Output Frequency
E4-01 60.0 Hz E3-04 * *Determined by control mode selected for motor 2.
Motor 2 Max Voltage E4-02 230 V* E3-05 *
*Determined by control mode selected for motor 2.
Double values for 400 V class drives. Multiply by 3 for 600 v
class.
Motor 2 Base
Frequency
E4-03 60.0 Hz E3-06 * *Determined by control mode selected for motor 2.
Motor 2 Mid.
Output Frequency
E4-04 3.0 Hz* E3-07 * *Determined by control mode selected for motor 2.
Motor 2 Mid. Output
Frequency Voltage
E4-05 12.6 V* E3-08 *
*Determined by control mode selected for motor 2.
Double values for 400 V class drives. Multiply by 3 for 600 V
class.
Motor 2 Minimum
Output Frequency
E4-06 0.5 Hz* E3-09 * *Determined by control mode selected for motor 2.
Motor 2 Minimum
Output Voltage
E4-07 2.3 V* E3-10 *
*Determined by control mode selected for motor 2.
Double values for 400 V class drives. Multiply by 3 for 600 V
class.
Motor 2 Parameter
Motor 2 Rated Current E5-01 1.90 A* E4-01 * *Depends on drive capacity.
Motor 2 Rated Slip E5-02 2.90 Hz* E4-02 * *Depends on drive capacity.
Motor 2 De-coupled
Load Current
E5-03 1.20 A* E4-03 * *Depends on drive capacity.
Motor 2 Poles E5-04 4-pole E4-04 4-pole ─
Motor 2 Line-to-Line
Resistance
E5-05 9.84 Ω* E4-05 * *Depends on drive capacity.
Motor 2 Leakage
Inductance
E5-06 18.2 %* E4-06 * *Depends on drive capacity
Parameter Name
G5 A1000 Comments (Gray shading indicates default settings)
No. Default No. Default G5 A1000