SMA SC 500U Installation - Manual (Page 19)

SMA Solar Technology AG
Installation Guide SC500U-IUS093411 19
3.4 Identifying the Sunny Central
You can identify the Sunny Central using the type plate (see
figure at right). The type plate is on the inside of the Interface
Cabinet.
3.5 Firmware
The Sunny Central's firmware, and that of the display, are
shown on the display of the Sunny Central.
The Sunny Central’s user manual describes how to obtain the
firmware version.
Position Description
A Type description of the Sunny Central
B Serial number of the Sunny Central
C Fabrication Version
D Fabrication Date
SMA Solar Technology AG
www.sma-america.com
SUNNY CENTRAL
Model: Serial No.:
SC500U 0180100000
Fabrication Date:
Max. Continuous output Power*
Operating voltage range (Vac 3-Phase)*
Min
422
Operating frequency range (Hz)*
Max. continuous output current*
Range of input operating voltage
MPPT Range of operating DC voltage*
Utility interactive inverter
LISTED UL 1741 36AN
500kWac
Nominal Max
480 522
Min
59.3
Nominal Max
60.0 60.5
601,4Aac
Output power factor 0.99-1,0
290 - 600 Vdc
The unit contains DC-Ground and Fault Detector
and Interruptor
Max. operating current*
300 - 600 Vdc
1600 Adc
ENCLOSURE Type 3R (IP54)
*For more details and for tightening torque,
allowable wire size and type see the Operator’s
Manual
Utility Interactive 3-Phase Inverter
Tested To Comply
With FCC Standards
FOR HOME AND OFFICE USE
08/2009
A
B
C
Fabrication Version: P02
D