HEIDENHAIN PWM 20 - Manual (Page 66)

November 2014 Software description 67
Edit datum
shift value
1. Editing in the datum shift line (word 0):
8
Click the datum shift value.
Enter a new value. If you intend to cancel the datum shift, enter the value 0.
To activate the edited datum shift, the encoder configuration must be saved in the encoder.
8 Click the "EnDat" button ("Save encoder configuration in encoder") to open the
window for selecting the memory area.
8
Select the "Operating parameters" memory area.
8
Click the "Transfer" button to save the data in the encoder.
Note
Manual editing of the datum shift is only recommended to expert users.
To shift the datum, always use the keys "Set datum shift" or "Cancel datum shift" on the
"Position display" screen!
EnDat-compliant datum shift is only taken into account here.