HEIDENHAIN PWM 20 - Manual (Page 141)

142 HEIDENHAIN ATS Software User's Manual
Traversing range:
This display shows the percentage of the traversing range that was already inspected.
The traversed range should be as large as possible. If the traverse range is not available in the
internal database, you are prompted to enter the measuring length in a separate window.
Previous measurements (wizard):
Results of the inspections in earlier steps of the testing wizard.
Available buttons:
Online diagnostics:
DRIVE-CLiQ does not allow closed loop operation. Therefore, closed loop operation is not
offered on the Online diagnostics screen.
Restart measurement
Save report