HEIDENHAIN PWM 20 - Manual (Page 38)

November 2014 Software description 39
8 Clicking the "Forward >" button opens the encoder data screen (power supply, encoder
interface).
Currently, the ATS software 3.0 supports the following encoder interfaces:
EnDat
1 Vpp
TTL
HTL
HTLs (without inverted signal)
DRIVE-CLiQ
SSI
Fanuc
Fanuc ALPHA i
Mitsubishi
Yaskawa
Panasonic
11 µApp
SSI+HTL
3 Vpp
25 µApp
1 Input of encoder power supply
2 Input of voltage readjustment over sensor lines
3 Input of data interface supported by the ATS software
Note
To compensate for voltage drops on the lines between test unit and encoder, HEIDENHAIN
recommends activating "Adjust voltage over sensor lines" (no. 2). When you select the
encoder through its ID number, voltage adjustment is automatically activated.