HEIDENHAIN 530 (340 49x-07) Pilot - Manual (Page 70)

70
Definin
g
Mac
hin
ing Oper
ation
s
Additional parameters on the drilling parameters detail form:
U Angle of spindle : Angle at which smarT.NC positions the tool before
it is plunged into or retracted from the bore hole
U Dwell time : Dwell time at counterbore floor
Globally effective parameters on the global data detail form:
U Setup clearance
U 2nd set-up clearance
U Feed rate for positioning
U Feed rate for traversing between machining positions