HEIDENHAIN 530 (340 49x-07) Pilot - Manual (Page 133)

133
Definin
g
Mac
hin
ing Oper
ation
s
Additional parameters on the turning parameters detail form:
U Starting angle : Starting angle in the XY plane
U Circ. surface angle : Angle of the first surface to be machined
U Angle of the face : Angle of the second surface to be machined
U Contour edge radius : Corner rounding in mm between the surfaces to
be machined
U Clearance height : Absolute height at which collision between tool and
workpiece is impossible
U Spindle : Direction of spindle rotation. As a default, smarT.NC sets M5
Only if the MILL mode is selected can you define the spindle speed and
direction
Globally effective parameters on the global data detail form:
U Setup clearance