HEIDENHAIN 530 (340 49x-07) Pilot - Manual (Page 175)

175
Definin
g
Mac
hin
ing P
o
sitions
Frame straight, rotated or distorted
U Starting point 1st axis : Coordinate of the starting point of
the frame ( 1 ) in the major axis of the working plane
U Starting point 2nd axis : Coordinate of the starting point of
the frame ( 2 ) in the minor axis of the working plane
U Distance in 1st axis : Distance of the machining positions
in the major axis of the working plane. You can enter a
positive or negative value.
U Distance in 2nd axis : Distance of the machining positions
in the minor axis of the working plane. You can enter a
positive or negative value.
U Number of lines : Total number of rows in the frame
U Number of columns : Total number of columns in the frame
U Rotation : Angle of rotation by which the entire frame is
rotated around the entered starting point. Reference axis:
Major axis of the active machining plane (e.g. X for tool axis
Z). You can enter a positive or negative value.
U Rotary pos. ref. ax. : Angle of rotation around which only
the principal axis of the machining plane is distorted with
respect to the entered starting point. You can enter a
positive or negative value.
U Rotary pos. minor ax. : Angle of rotation around which only
the minor axis of the machining plane is distorted with
respect to the entered starting point. You can enter a
positive or negative value.
The Rotary pos. ref. ax. and Rotary pos. minor ax.
parameters are added to a previously performed rotation of
the entire frame.