HEIDENHAIN 530 (340 49x-07) Pilot - Manual (Page 144)

144
Definin
g
Mac
hin
ing Oper
ation
s
Unit 141 Datum Shift
Unit 141 Datum Shift is used to define a datum shift with the direct input
of shift values in the specific axes, or by definition of a number from the
datum table. You need to have specified the datum table in the program
header.
Select the desired definition type via soft key
U Define datum shift by entering a value.
U Define datum shift via the datum table. Enter the datum
number or choose it via the SELECT NUMBER soft key.
Select datum table if necessary.
U Reset the datum shift.
If you have selected a datum table, the TNC only uses the
programmed line number until the next time a datum
number is called (unit-wise effective datum shift).
Completely reset datum shift: Press the RESET DATUM
SHIFT soft key. If you only want to reset the datum shift in
specific axes, program the value 0 in the form for the
respective axis.