HEIDENHAIN 530 (340 49x-07) Pilot - Manual (Page 55)

55
Definin
g
Mac
hin
ing Oper
ation
s
Tool selection
As soon as an input field in the tool selection is active, you can use the
TOOL NAME soft key to choose if you want to enter the tool number or
tool name.
There is also a SELECT soft key for calling a window from which you can
select a tool defined in the tool table TOOL.T. smarT.NC then writes the
tool number or tool name of the selected tool automatically in the
corresponding input field.
You can also edit the displayed tool data:
U Use the arrow keys to select the line and then the column of the value
to be edited: The light-blue background marks the editable field
U Set the EDIT soft key to ON, enter the desired value and confirm with
the ENT key
U If needed, select further columns and repeat the described procedure