Epson 2000 - Manual (Page 26)

3-2 Loading the Paper
R4C428_V2
long.bk
Rev_C
A5 size PAPER.FM
1/14/00 Pass 2
L Proof Sign-off:
tantoname
_______
leadername _______
editorname _______
Loading Paper
This chapter explains how to load paper and other media into the
paper feeder for printing and copying, and describes proper
handling of these media. For information on feeding documents
into the document feeder, see chapters 8 and 9.
Loading Plain Paper
Follow these steps to load plain paper into the Stylus Scan for
printing or copying.
1. Lower the output tray and slide out the extension. Next, slide
the left paper edge guide so that the distance between the edge
guides is slightly wider than the width of your paper.
2. Fan a stack of paper; then tap it on a flat surface to even the
edges.
3. Load the stack of paper with the printable side up and the
right edge of the paper resting against the right edge guide of
the paper feeder. Then slide the left edge guide against the
left edge of the paper.