Epson 2000 - Manual (Page 160)

11-14 Maintenance
R4C428_V2
long.bk
Rev_C
A5 size MAINT.FM
1/14/00 Pass 2
L Proof Sign-off:
tantoname
_______
leadername _______
editorname _______
4. If the outer case or the inside of the paper feeder is dirty, clean
it with a soft, clean cloth dampened with mild detergent. Keep
the front cover and the top cover closed to prevent water from
getting inside.
5. If the scanner glass is dirty, open the top cover. Then clean the
glass with a soft, clean and dry cloth, or with a blower brush.
6. If the inside of the Stylus Scan accidentally gets soiled with
ink, wipe the ink away with a damp cloth.
c
Caution:
❏ Never use alcohols or thinners to clean the Stylus Scan;
these chemicals can damage the components as well as
the case.
❏ Be careful to keep water away from the printing and
scanning mechanisms and electronic components.
❏ Do not use a hard or abrasive brush.
❏ Do not spray the inside of the Stylus Scan with
lubricants; unsuitable oils can damage the mechanisms.
Contact your dealer or a qualified service person if
lubrication is needed.
Transporting the EPSON Stylus Scan
If you need to transport your EPSON Stylus Scan, carefully repack
it as described below using the original box and packing
materials.
1. Open the front cover and make sure that the print head is in
the home (far right) position. If not, turn on the Stylus Scan
and wait until the print head returns to the home position.
Then turn off the Stylus Scan and close the front cover.