Epson 2000 User Manual
Page 153
Maintenance
11-7
R4C428_V2
long.bk
Rev_C
A5 size
MAINT.FM
1/14/00
Pass 2
R
Proof Sign-off:
tantoname
_______
leadername
_______
editorname
_______
Below are sample printouts:
Good sample
Print head needs to be cleaned
The above sample is in black and white, but the actual test prints in color
(CMYK)
In the check pattern, if you find that any segments are missing
from the test lines, you may need to repeat the head cleaning and
print the nozzle check pattern again.
If print quality does not improve after repeating this procedure
four or five times, turn the Stylus Scan off and leave it off
overnight. Then do the head cleaning again.
If the print quality still has not improve, one or both of your ink
cartridges may be old or damaged and may need to be replaced.
To replace an ink cartridge before it is empty, see “Replacing an
Old or Damaged Ink Cartridge” on page 10-11.
If print quality remains a problem after replacing the ink
cartridges, contact your dealer.
segments are missing