Epson 2000 - Manual (Page 161)

Maintenance 11-15
R4C428_V2
long.bk
Rev_C
A5 size MAINT.FM
1/14/00 Pass 2
R Proof Sign-off:
tantoname
_______
leadername _______
editorname _______
c
Caution:
Leave the ink cartridges installed during transport.
Removing the cartridges for transport may damage the
Stylus Scan and make the cartridges unusable.
2. Make sure that the top and front covers are closed.
3. Unplug the power cord from the electrical outlet; then
disconnect the interface cable from the Stylus Scan.
4. Remove the paper from the paper feeder and remove the
paper supports.
5. Push in the output extension tray, and then raise the output
tray.
6. Open the front cover again. Secure the ink cartridge holders
to the body of the Stylus Scan with tape as shown below. Then
close the cover.
7. Attach the protective materials to both sides of the Stylus
Scan.
8. Repack the Stylus Scan and power cord in the original box.
9. Keep the Stylus Scan level during transport.