Epson 2000 - Manual (Page 174)

12-12 Troubleshooting
R4C428_V2
long.bk
Rev_C
A5 size TRBLE.FM
1/14/00 Pass 2
L Proof Sign-off:
tantoname
_______
leadername _______
editorname _______
If this doesn’t work, replace the ink cartridges. See “Replacing
a black ink cartridge” on page 10-6 and “Replacing a color ink
cartridge” on page 10-3 for instructions.
Paper out lights are flashing or on
If the paper out light is flashing, remove any paper that may be
jammed in the Stylus Scan.
If the paper out light is on, load more paper into the paper feeder.
One of the ink out lights is flashing or on
If the B black or A color ink out light is flashing, ink is low. Prepare
a replacement cartridge.
If the B black or A color ink out light is on, ink is out. Replace the
appropriate cartridge. See “Replacing Empty Ink Cartridges” on
page 10-2.
All lights are flashing
Follow these steps.
1. Remove all paper from the Stylus Scan.
2. Turn the Stylus Scan off. Check for and remove any foreign
objects or pieces of paper from inside the device. Also, make
sure that there is sufficient space around the rear vent to allow
for proper ventilation. Remove any objects blocking the vent,
then turn the power back on.
3. If the error is not cleared, contact your dealer.
Paper does not feed correctly
If one of the following problems has occurred, try the solutions
listed for that problem.
❏ Paper doesn’t feed